How Do You Change Headlight Bulb In 2003 Prius?
• Driver Side – Open Hood and locate the washer fluid fill tube. You will need to remove this before starting. The tube is connected to the frame with a plastic clip. Pinch the clip from the top and gently pull upward. The tube should slide up and out. • After removing the tube, you should be able to see the electrical connection to the bulb. Grab the connector with your thumb and index finger and GENTLY rock the connector up and down and side to side while applying rearward pressure until it comes free from the bulb. • Next you need to remove the rubber seal that protects the bulb from outside debris. The seal is about 4″ in diameter and surrounds the back of the bulb. There are 2 tabs that you can use to remove this seal. It may be easier to grab the lower one and pull out and then grab the top one and do the same. It should come out fairly easy using this method. There is no twisting or turning needed to remove this. • After you have removed the rubber seal set it aside and locate t
