How Do You Change Dirt Devil Vacuum Cleaner Belts?
We all have to use a vacuum cleaner, and unfortunately, the vacuum cleaner belt will eventually break. If you have a Dirt Devil vacuum cleaner here is how you change the belt. Step 1 jQuery(document).ready(function(){ jQuery(‘#jsArticleStep1 span.image a:first’).attr(‘href’,’http://i.ehow.com/images/GlobalPhoto/Articles/4807912/avacuum2_Full.jpg’); }); Vacuum Clearner Manual Make sure the vacuum cleaner is unplugged. Turn the vacuum cleaner over and lay it flat on the floor. To remove the nozzle guard use a phillips screw driver and remove the three screws. There are arrows that show the location of the screws. Step 2 After you have removed the three screws, pull and lift the nozzle guard off. Step 3 Lift and remove the brush roll. Throw the old belt away. Make sure you clean off the brushroll. Step 4 Slide the belt onto the motorshaft. Place the belt on the area of the brushroll without bristles. Step 5 With the new belt in place, pull and slide the brushroll into the nozzle making su
