How Do You Change A Rear Turn Signal Bulb On A 1999 Buick Century?
Sometimes it’s a lot less expensive if you can manage to do some simple maintenance, like replacing a turn signal bulb, on your own without hiring an automotive technician. First open the trunk of your Buick Century. On each side you will see two big plastic nuts. They may be used as hooks for your trunk net, if you have one. Next remove the two nuts on whichever side your turn signal bulb needs replaced. You should be able to remove these by hand, but if they are a little tight, slip a screwdriver in one of the hooks for leverage. Now you will want to carefully pull the carpet back, just far enough to expose two more plastic nuts underneath. Follow the same steps as above to remove these two nuts. Push the metal studs that you just revealed toward the outside of the car. This will loosen the tail light assembly so that you can pull it out. Finally slightly twist and then pull the bulb assembly attached to the wire out of the taillight assembly. This will reveal the bare bulb. Pull the
