How Do You Change A Power Window Motor On A Ford Windstar?
A Ford Winstar uses a two-post, cable-operated window regulator. The window motor is mounted separately and is attached to a drum that the cable is wound around. The motor can be replaced without removing the window regulator. Remove the door panel’s Phillips screws from the arm rest and the screw in the door handle. Remove the plastic cover concealing the mounting surface for the outside mirror. Remove the window switch by prying it forward and up with very little pressure. Disconnect the electrical connector. Remove any screws around the circumference of the door panel if any. Grab the door panel at the bottom and lift it up to release the hooks on the lower part of the door. Tip the bottom of the door panel outward a little and push up to release the top of the door panel where it is hooked on the top ledge. Disconnect all electrical connectors on the door panel. Remove the panel. Reach inside the access hole to remove the electrical connector to the window motor. Remove the bolts h
