How Do You Build A Rocking Chair?
There is nothing quite so relaxing as sitting in a rocking chair and rocking after a tough day. Did you ever wish you could make a rocking chair of your own? Get ready to rock your way to relaxation by reading how to learn how to build a rocking chair. Step 1 Choose the wood you wish to use for your chair. Pine is the least expensive wood, but a harder wood such as oak will last longer, especially if the chair is intended for outdoor use. Step 2 Cut two pieces of wood 3/4 inches thick, 3 1/2 inches wide by 21 inches long. Mark with a pencil which end will be the top. Step 3 Mark 6 1/2 inches up from the bottom of each front leg, and make a notch beginning at this mark that is 5 1/2 inches long and 3/4 inches deep on the edge of each front leg. You may use a router to make these notches. The notches will hold the top front support. Step 4 Make the top front support interesting by keeping the top straight (the seat will rest upon the top), and cutting a curve into the bottom. Draw the cu
