How Do You Build A Rabbit Hutch?
Constructing a rabbit hutch takes some work. But, if you are a do-it-yourself kind of person and want to add some homemade touches to your rabbit’s abode, here’s how to do it. • Construct the sides of the hutch. • Bend the 18-inch by 132-inch piece of woven wire at a right angle in three places. • Measure 36 inches across the piece of woven wire and fold. #**From that fold, measure another 30 inches across and fold. • Measure 36 inches and fold. The remainder should measure 30 inches. • Fasten a hog ring on the edge of the 30-inch side and then fasten the ring to the edge of the 36-inch side. • Place hog rings at 5-inch intervals, making sure the edges are secured. Also use hog rings at 5″ intervals to secure the floor and the top. • For the door, cut at least 2 inches from either side of the 36-inch side, and at least 2 inches from the bottom and the top. • Use your wire cutters to cut a 13-inch wide and 12-inch tall hole. • Use hog rings to attach the 14-inch by 15-inch piece of wove
