How Do You Build A PVC Multiple Guitar Stand?
A PVC pipe guitar stand is a quick and easy way to store or hold multiple guitars when they are not being played. This guitar stand holds four guitars. Modify it to hold more or less instruments. A PVC pipe guitar stand takes about two hours to assemble. Read on to learn how to build a PVC multiple guitar stand. Measure and cut four 32-inch pipe pieces, three 27-inch pipes and five 5-1/2-inch pieces of pipe. Lay two 32-inch pieces on the floor. Slide one “T” connector onto the end of the pipe. Push it on the pipe until 4 inches of pipe are on one side. The open hole needs to face up. Slide two “T” connectors on the other side of the pipe. Set one connector 8 inches from the end and the other 4 inches from the end. The empty connector needs to face sideways. Repeat with the other pieces of PVC pipe. Stick an elbow connector on each end of the pipes. These need to face down to lift the rack slightly off the floor. Slide two of the 27-inch pieces into the connectors facing sideways. Cover
