How Do You Build A Fish Cleaning Station?
A fish cleaning station gives you a sturdy tabletop to fillet your fish right on your boat. You can store all of your filleting supplies including a glove, towel, sharpening stone and fish bags all in one place, and it gives you a stable place to cut your fish and bait. Cut four 3 1/2-foot-long 2-by-4 inch boards, four 3-foot-long 2-by-4 boards, and four 1-foot-by-9-inch long 2-by-4 boards. Then assemble them in a box frame. Cut two 3-by-2 foot plywood sheets for the tabletop and bottom shelf. Attach one to the top of the box frame and then cut out the corners to fit the second one inside the box frame on top of the four bottom 2-by-4 boards. Use galvanized wood screws or nails. Cut two 2-by-3 1/2 foot sheets for the side walls, and then one 3-by-3 1/2 foot sheet for the back. Attach these to the frame using wood screws or nails again. Cut one 3-foot-long 2-by-4 board in half and screw this to the backside of the tabletop. This is a guide to keep fish from sliding off the back. You can
