How Do You Apply Vinyl To Car Or Truck Using The Wet Method?
This article explains how to apply vinyl to an automobile using the wet method. This method allows you to mess up and reapply, and is the best method for beginners. Your first step is to find the area on the car that you are planning to put the decal. You want to remove all dirt, road grime, and wax from this area so the vinyl has a good surface to cling to. Fill a spray bottle with tap water and one drop of soap. This will be used to let you move the decal around after it has been placed on the car. Remove the protective backing from the vinyl. As you are removing the vinyl, you want to spray the sticky side with the soapy water solution. Spray the car thoroughly with the soapy water where the vinyl will be applied, then stick the vinyl onto the vehicle. The vinyl should now be on the vehicle. The next step is to spray the outside of the vinyl with water. This will be the buffer between the vinyl decal and the squeegee. Now you want to begin to take all of the air bubbles and wrinkles
