How Do You Activate Prius Hybrid Electric Only And Stop Using Gas?
Everybody loves to save gas these days as gas prices continue to raise. The most fuel efficient car today on the road is the Toyota Prius. But it can be more fuel efficient with new technology today. Just read the step below to find out how to install this device and save even more fuel. Step 1 Tools needed are a screwdriver, and needle nose pliers. Step 2 Remove the square trim piece below the air conditioning vent on the passenger side in the interior of the car. Step 3 Open the upper glove box. Remove the air conditioning vent cover. Pry the bottom of the vent first then pull the top free. Step 4 Open the lower glove box door and you will see a damp or two. Pop it free and then squeeze the side of the glove box and slowly lower it down. Step 5 Locate the bottom gray plug and remove it. Step 6 Pull the plug where you will be placing the wire tap on the white and black stripe corner of the wire. Step 7 Place the tap on the purple wire near the center of the plug. Step 8 Locate the pro
