HOW DO U TAKE FRONT TIRE OFF?
To remove front tire. Raise the bike off the ground so that the front tire is just barely on the ground. Remove the large nut on the axle and loosen the two bolts on the axle clamp on the other side of the wheel. Drive the axle out. Now, roll the front tire out from under the front fender being watchful of any spacers and speedo drives that are with the front wheel. Remember which side any spacer go and mark them. Reassembly is virtually the reverse except that you may have to use a screwdriver to spread the front brake pads. Make sure you get the speedometer drive tang in the hole on the front disc if you have a mechanical speedo drive. To change the rear brake pads, remove the two bolts that hold the rear caliper onto the caliper support bracket. Carefully lift the caliper off the bracket. Notice how the rear pads and the anti-rattle clips are positoned on the caliper support bracket. Replace old parts with new parts. You’ll need to depress the brake piston back into the caliper in o
