How do the hangers attach to the wall?
Our hangers set on screws in the wall using keyhole slots routed into the backside of the hanger. The keyholes allow the hanger to be installed flush against the wall. They also provide a safe way to keep your hanger on the wall. To take the hanger off of the wall you have to lift up on the hanger. We have included enough keyholes to support even a heavy rug and they are separated at 16 inches on center for use with your wall studs when possible. If you are installing the hanger onto the studs you can use a screw at each keyhole. If you would prefer to have keyholes installed to your own specifications, please call and we will tell you what the additonal fee and time frame will be. If the placement of your hanger does not align the keyholes with your wall studs we strongly recommend using wall anchors to install the screws. Any hardware store should have wall anchors. Make sure you know what kind of wall you have and how heavy your hanging will be so you buy the right kind: Drywall, pl
