How do I wire two CK-61s with one power venter and two oil-fired appliances?
Inside R8184G primary control, separate the orange wire from the two black wires on one of the appliances. Run the orange wire to T1 on one of the CK-61’s. Run T3 on the same CK-61 to one side of WMO-1. Run other side of WMO-1 to the two black wires (that the orange just came from) on same appliance. Run T2 on same CK-61 to the white wires at burner. Repeat same steps for other CK-61 on other appliance. Using extra 1/4″ O.D. tubing and “Tee”, mechanically connect both pressure switches on both CK-61’s to the stainless steel tube on power venter. Using a separate 120-vac power source, run hot leg to L1 on one CK-61, then run a wire from L1 on first CK-61 to L1 on the second CK-61. Run a wire from both M terminals to the black wire on power venter motor. Connect both N terminals to the neutral leg of power source, and to the white wire on the power venter motor.
