How do I use the SmartBoard in Gould 102?
• Roll the SmartBoard to where you want to use it. Note that it has an umbilical cord to provide power and network connections — please try not to roll over or step on this cord. Also please do not use the laptop shelf on the left side of the SmartBoard as a handle — you’ll risk breaking it off. • Press the power button near the right end of the panel (just below the screen). The adjacent green light will begin to blink as the projector warms up. • About four inches to the left of the power button is a button you can use to select the input. Press this button repeatedly until the green LED lights up next to the input you want to use (either the self-contained computer or a laptop you’ve attached (see steps 4 and 5 below)). • You should see a bundle of cables sheathed in a woven black tube and draped over the laptop shelf. Connect the video cable from this bundle to your computer. You may also connect the network and/or audio cables if you like — the SmartBoard has a built-in amplifi
