How do I upgrade the software of a 1095 mDSL modem?
A. You will need a cable to connect the Model 1095 control port to a DB-9 PC serial port and a flash image (xxxxxx.IMG). The cable should be wired: RJ – 45 DB – 9 Pin 8 RTS Pin 7 Pin 7 CTS Pin 8 Pin 6 TD Pin 3 Pin 5 RD Pin 2 Pin 4 SG Pin 5 Then follow these instructions to load the code into the 1095 Flash Memory. • Copy the (xxxxxx.IMG) to a TEMP file on the PC that will be used to program the Model 1095. • Use Windows HyperTerm, or some other Terminal Emulation Program set for 9600 bps, NO parity, 1 stop, X-ON/ X-OFF. • Turn the Model 1095 power OFF 4. Set configuration Switch S2- 6 and 7 OFF (Reserved) • Turn ON the Model 1095 Power, The TM and ER LED will turned on. The 1095 will send “BEGIN” to the PC. • From Hyper Term select Send Text File on the Transfer menu. • Open the image File, xxxxxx.IMG. You will see DOT’s on the PC screen (about 4 lines of DOT’s.
