How do I update firmware on a WxGoos Series I?
These instructions can also be found in the firmware zip file. • Download the latest firmware for your device from: www.itwatchdogs.com/downloads.shtml • Connect the unit with a CROSS-OVER cable to the computer that will be used for the update. Trying to update a unit not directly attached to a computer MAY damage the unit and WILL VOID YOUR WARRANTY. • Change your Network Interface Card’s (NIC) settings to the following: IP Address: 192.168.123.100 Subnet Mask: 255.255.255.0 Gateway: 192.168.123.1 • If you have enabled the built-in Windows firewall or any third-party firewall, disable it before continuing. • Extract the zip file to an easy to find location (ie a folder on your desktop or at the root level of your hard disk) • Open the folder in Windows Explorer. • Double-click on the ‘updater.exe’ file and follow the on-screen instructions. • If everything works properly, the device should be available for use about two minutes after the update is complete. • Restore the NIC’s previou
