How do I sync the arpeggiator on my synth to MIDI clock using the Pro-Solo?
Answers differ depending if you have Pro-Solo mk1 or mkII – For mk1 – The Pro-Solo will operate in either sync mode, or CV mode, but cannot perform both tasks simultaneously. This is because in sync mode, the CV, Gate and Aux sockets are used to output the required clock pulses. If you want to clock your synths arpeggiator, put the Solo in sync mode by switching it on with the ‘inc’ button pressed and connect the ‘Aux’ output jack to the clock input jack on your synth. If your synth requires a DIN Sync-24 type signal use the Pro-Solo Sync-24 adapter cable available from Kenton. For mkII – If you want to clock your synths arpeggiator, connect the ‘Aux1’ output jack of the Solo to the clock input jack on your synth and select clock as the controller using parameter #20. If your synth requires a DIN Sync-24 type signal use a standard 5 pin DIN cable plugged into the Thru/Sync output on the Solo and select sync 24, using parameter #42 .
