How do I setup the Advanced Network test to test more than 4 network ports on my system?
The BurnInTest help file contains information on the workings and setup of the Advanced Network test. In summary, this test allows an M:N network test, where M is the number of PC’s running BurnInTest and N is the number of PC’s running Endpoint software. To test say 6 network ports on a system you will need to run BurnInTest on this PC with 6 network ports. For this test you would only run BurnInTest on this one system. You will also need other PC’s (1 or more) on the network with 6 (or more) Network Adapters and these systems must run the Passmark Endpoint software. The Endpoint software can be found in the BurnInTest installation directory, and should be copied to the Endpoint PC systems. You specify the Network ports on the BurnInTest system to test, the network load, protocols etc in Preferences -> Network -> Advanced Network Test -> Edit Options -> Test On/Off etc.. You do not specify the Endpoint Network port addresses as these are determined automatically by BurnInTest. The adv
Related Questions
- I have selected the correct Model for Dish Network System in the Setup Wizard, however I am not able to change the channels through Vulkano. Is this a Hardware problem?
- What equipment do I need to setup a video surveillance system with network camera or video server ?
- How do I setup the Advanced Network test to test more than 4 network ports on my system?
