How do I setup a PTZ camera on the DVR3400 system?
Setting Up the PTZ: a) Assign an address to each PTZ using the dipswitch. Different cameras have different dipswitch locations. Please refer to your camera users manual to locate the dipswitch b) Run a pair of wires from the D+ and D- connection on camera 1 to D+ and D- connection on camera 2. c) Run a pair of wires from the D+ and D- connection on camera 1 to the D+ and D- connection on “RS232 to RS485 Converter”. d) Connect RS232 to RS485 Converter to the com port on the back of the machine. The com port is located to the right of the keyboard ps/2 port. e) Connect the video feed to the corresponding channel of the camera’s assigned address. Ex. If your camera address is 5, please connect the video cable into channel 5 of the dvr. f) Press the Menu button on the ADR 3400. Then go System Setup–> Serial Ports. Select Com 1 Device and use the Arrow Button on the remote until PTZ Camera is selected. Go to Com 1 Baud Rate and use the Arrow Button until the the correct Baud Rate is select
