How do I set-up Zone 3 using the internal amplifiers for the RX-V1800?
Speaker Connection: • Make sure the receiver is unplugged from the power source. • Connect the pair speakers that are to be controlled as Zone 3 to the SP2 speaker terminals. • Plug the receiver back into the power source. RX-V1800 Receiver Configuration for SP2 (Zone 3): • Bring up the RX-V1800 on-screen display (OSD) by setting the [SIDE SELECTOR SWITCH] on the Yamaha remote control to [AMP] and pressing the [SET MENU] button. The OSD should now be displaying on the TV Monitor. • Use the [UP/DOWN ARROWS] on the remote control to navigate to Manual Setup then press the Enter button on the remote. • Use the [UP/DOWN ARROWS] on the remote control to navigate to Option then press the Enter button on the remote. • Use the [UP/DOWN ARROWS] on the remote control to navigate to Zone 2 Set then press the Enter button on the remote. • Verify that the arrow > is pointing to ZONE3. • Use the [UP/DOWN ARROWS] on the remote control to navigate to AMP.
Speaker Connection: • Make sure the receiver is unplugged from the power source. • Connect the pair speakers that are to be controlled as Zone 3 to the SP2 speaker terminals. • Plug the receiver back into the power source. RX-V1800 Receiver Configuration for SP2 (Zone 3): • Bring up the RX-V1800 on-screen display (OSD) by setting the [SIDE SELECTOR SWITCH] on the Yamaha remote control to [AMP] and pressing the [SET MENU] button. The OSD should now be displaying on the TV Monitor. • Use the [UP/DOWN ARROWS] on the remote control to navigate to Manual Setup then press the Enter button on the remote. • Use the [UP/DOWN ARROWS] on the remote control to navigate to Option then press the Enter button on the remote. • Use the [UP/DOWN ARROWS] on the remote control to navigate to Zone 2 Set then press the Enter button on the remote. • Verify that the arrow > is pointing to ZONE3. • Use the [UP/DOWN ARROWS] on the remote control to navigate to AMP. • Use the [RIGHT ARROW] button to change it to
