Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How do I Set-Up Zone 2 using the internal amplifiers for the RX-V2700?

April 26, 2017amplifiers Internal RX-V2700 set-up zone

0

Posted

How do I Set-Up Zone 2 using the internal amplifiers for the RX-V2700?

1 Answer

0

Posted

Speaker Connection: 1. Make sure the receiver is unplugged from the power source. 2. Connect the pair speakers that are to be controlled as Zone 2 to the SP1 speaker terminals. 3. Plug the receiver back into the power source. Receiver Configuration: 1. Bring up the receiver Graphical User Interface (GUI) by setting the side selector switch on the Yamaha remote control to AMP and pressing the Menu button. The GUI should now be displayed on the TV Monitor. 2. Use the Up/Down arrows on the remote control to navigate to Manual Setup then press the Enter button on the remote. 3. Use the Up/Down arrows on the remote control to navigate to Option then press the Enter button on the remote. 4. Use the Up/Down arrows on the remote control to navigate to Zone 2 Set then press the Enter button on the remote. 5. Use the Up/Down arrows on the remote control to navigate to Zone 2 Amplifier then press the Enter button on the remote. 6. Use the Up/Down arrows on the remote control to navigate to INT: [