How do I set-up Zone 2 and Zone 3 on the RX-V1400 using the remote control?
1. Press the DVD input selector on the RX-V1400 remote. 2. Press and hold the Learn button down gently using a paper clip for 3 seconds. DVD and Setup will blink alternatively on the remote LCD screen. 3. Press the Arrow to the right button until L: AMP comes up in the remote LCD window. 4. Press the Up arrow button until Zone comes up in the remote LCD window. 5. Press the Learn button to complete Zone setup. Setting up Zone 2 on the RX-V1400 amplifier: 1. Go into the Manual Setup Menu on the RX-V1400 receiver by pressing the Amp button on the remote control, and then use the Arrow up and down buttons on the RX-V1400 remote control to move the arrow key indicator to Manual Setup. 2. Press the Arrow button to the Right to enter Manual Setup. 3. Use the Arrow Down button to select the number 4 Option Menu. 4. Press the Arrow button to the Right to enter the Option Menu. 5. Use the Arrow Down button to select F Zone 2 Set. 6. Press the Arrow button to the Right to enter Zone 2 setup. 7.
• Press the DVD input selector on the RX-V1400 remote. • Press and hold the [LEARN] button down gently using a paper clip for 3 seconds. DVD and Setup will blink alternatively on the remote LCD screen. • Press the [ARROW] to the right button until L: AMP comes up in the remote LCD window. • Press the [UP ARROW] button until Zone comes up in the remote LCD window. • Press the [LEARN] button to complete Zone setup. Controlling Zone 2: • Press the [SOURCE SELECT UP] arrow button until the Zone of choice appears in the remote LCD window. • Press the [SYSTEM POWER] button to power on your selected Zone. • Press an [INPUT SELECTOR] button to select the Input Source you want to listen to. • The display window shows (2:) name of selected input if the remote control is in the Zone 2 mode. NOTE: Signals input to V-AUX, PHONO and Digital jacks cannot be sent to Zone 2 & 3.
1. Press the DVD input selector on the RX-V1400 remote. 2. Press and hold the Learn button down gently using a paper clip for 3 seconds. DVD and Setup will blink alternatively on the remote LCD screen. 3. Press the Arrow to the right button until L: AMP comes up in the remote LCD window. 4. Press the Up arrow button until Zone comes up in the remote LCD window. 5. Press the Learn button to complete Zone setup. Setting up Zone 2 on the RX-V1400 amplifier: 1. Go into the Manual Setup Menu on the RX-V1400 receiver by pressing the Amp button on the remote control, and then use the Arrow up and down buttons on the RX-V1400 remote control to move the arrow key indicator to Manual Setup. 2. Press the Arrow button to the Right to enter Manual Setup. 3. Use the Arrow Down button to select the number 4 Option Menu. 4. Press the Arrow button to the Right to enter the Option Menu. 5. Use the Arrow Down button to select F Zone 2 Set. 6. Press the Arrow button to the Right to enter Zone 2 setup. 7.
Related Questions
- How do I sync my PocketPC with Oracle Calendar (when time zones do not match/unable select a time zone on the Oracle sync set-up screen)?
- The mobile photo radar vehicle was set-up in a construction zone, but there were no workers present. Why is it there?
- How do I Set-Up Zone 2 using the internal amplifiers for the RX-V2700?
