How do I set up my CalComp tablet to work with AutoCAD 2000?
1. In AutoCAD 2000, pick the Tools pull-down menu, then pick Options. 2. Pick the System tab. In the area called “Current Pointing Device”, select Wintab Compatible Digitizer ADI 4.2 – by Autodesk. 3. In the same dialog box under Accept input from:, select Digitizer and mouse. Now pick the Apply button and then the OK button. How do I get AutoCAD 14 or 2000 to access both screens with my Dual Monitors? Before using these instructions, make sure you are using TabletWorks Wintab Driver Version 5.2 (or higher) or 6.1 (or higher), which support Dual Monitors. 1. Open the TabletWorks Control Panel. 2. Enter the Tablet or Mapping screen (depending on which version of the Wintab driver you are using). 3. Select Enable Mapping (make sure the “WYPIWYG” pointing mode is selected). Now select Apply. Setting the TabletWorks Control panel up this way will allow you to use the DrawingBoard III in absolute mode on both screens in AutoCAD. Why does my digitizer work only after I remove my comports fro
