How do I set up an HP-compatible printer to print PostScript files?
Solaris 8 has this ability with Print Manager, /usr/sadm/admin/bin/printmgr, Note that higher-end HP printers (e.g., LaserJet IV) support PostScript directly. Also, Michael Riley reminds us that EPP and ECP printer modes are unsupported. Before you do any of this, try printing a plain text file (such as /etc/motd) to the printer. John Groenveld provides the following instructions for Solaris 8. It assumes you have a working Ghostscript with a driver for your printer and that it’s attached to /dev/lp1 (/dev/lp0 on some systems). With Solaris 8, USB printers are assigned logical device names /dev/printers/[0..
Solaris 8 has this ability with Print Manager, /usr/sadm/admin/bin/printmgr, or admintool (select “Browse–>printers”). For older versions of Solaris, install GhostScript, then use GhostScript (gs) to filter PostScript files for output to HP LaserJet-compatible (PCL) printers. Add a filter description file in the /etc/lp/fd directory to call GhostScript. This technique works for any GhostScript-supported printer. Note that higher-end HP printers (LJ IV) also support PostScript directly. For details, see Alexander Panasyuk’s GhostScript Solaris Printer HOWTO at http://cfauvcs5.harvard.edu/SetGSprinter4Solaris.html Before you do any of this, try printing a plain text file (such as /etc/motd) to the printer. Michael Riley reminds us that EPP and ECP printer modes are unsupported. John Groenveld provides these instructions: Here’s the procedure I followed. It assumes you’ve got a working ghostscript with a driver for your printer and that it’s attached to /dev/lp1 (/dev/lp0 on some systems
Basically, install GhostScript, then use GhostScript (gs) to filter PostScript files for output to HP LaserJet-compatible (PCL) printers. Add a filter description file in the /etc/lp/fd directory to call GhostScript. This technique works for any GhostScript-supported printer. Note that higher-end HP printers (LJ IV) also support PostScript directly. For details, see Alexander Panasyuk’s GhostScript Solaris Printer HOWTO at http://cfauvcs5.harvard.edu/SetGSprinter4Solaris.html Alan Orndorff also provides instructions in his “Solaris x86 Resources,” http://www.mindspring.
Solaris 8 has this ability with Print Manager, /usr/sadm/admin/bin/printmgr, or admintool (select “Browse–>printers”). Note that higher-end HP printers (e.g., LaserJet IV) support PostScript directly. Also, Michael Riley reminds us that EPP and ECP printer modes are unsupported. Before you do any of this, try printing a plain text file (such as /etc/motd) to the printer. John Groenveld provides the following instructions for Solaris 8. It assumes you have a working GhostScript with a driver for your printer and that it’s attached to /dev/lp1 (/dev/lp0 on some systems). With Solaris 8, USB printers are assigned logical device names /dev/printers/[0..
Related Questions
- How do I print Japanese text files on a non-Japanese PostScript printer from a system that doesn have Japanese locales installed?
- I have a Hawat-Pickford 520xz ink jet printer without PostScript, is there anyway I can print PostScript files on it?
- How do I set up an HP-compatible printer to print PostScript files?
