How do I set the EasySet mouse trap?
1. Pull the bow (the spring loaded part) back, holding it down with the thumb of one hand. 2. With your other hand, take the locking bar (the long arm with the curve in the end that is attached to the back of the trap) and lay it in the center of the spring. Make sure that the curved or cupped part faces downward. 3. Begin to tilt the cheese pedal upward. As you do, you’ll notice that the tip the locking bar will engage inside a little box-like opening on the back of the cheese pedal. 4. Slowly release your grip on the bow, the force of which should hold the locking bar inside that little box on the pedal. The trap is now set. 5. There is an “S” and an “F” imprinted on the pedal itself. If you wish the trap to be more sensitive, position the locking bar towards the “S” side of the little box by sliding it that direction. “F” stands for firm (less sensitive).
