How do I secure/protect my wireless network by using WEP encryption on TP-LINK wireless Router?
Suitable for : TL-WR642G/TL-WR641G/TL-WR543G/TL-WR542G/TL-WR541G Step 1 Open the web browser and type the IP address of the router (default is 192.168.1.1) into the address bar and then Press Enter. Step 2 Type the username and password in the login page, the default username and password both are admin. Step 3 Click Wireless->Wireless Settings on the left to open the wireless setting page. Step 4 Enable “Enable Wireless Security”, change the Security Type to WEP. Security Option and WEP key Format can be keep on default settings, Step 5 Select a key. There are 4 keys, you can use any of them. We select Key 2 for example. Change Key Type from Disable to 128bit, type your key (password) into WEP key box. Step 6 Click Save button to save the settings. Note: 1. If you had enabled the Wireless Security, but you do not set the key or your key is shorter than the key length, the wireless security function will be still not active even you had selected Shared Key as Authentication Type. 2. If
