How do I reset factory defaults on the ProCurve 1810G Series Switches?
You can restore the factory default configuration on the switch by pressing the Reset and Clear buttons. To execute the factory default reset on the switch, perform these steps: • Using a small, thin tool with blunt ends (such as a paper clip), simultane¬ously press both the Reset and Clear buttons on the front of the switch. • Continue to press the Clear button while releasing the Reset button. • When all three Mode LEDs (Act, FDx, and Spd) begin to blink, release the Clear button. • The switch will then complete its self test and begin operating with its configuration restored to the factory default settings. After completing this procedure, there will be no password, the IP address will be returned to the default 192.168.2.10, and all configuration settings will be returned to factory defaults.
