Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How do I replace the bulbs in my tailights?

bulbs replace tailights
0
Posted

How do I replace the bulbs in my tailights?

0

Rodeo/Amigo: There are 2 screws on the side and one under (between light and bumper) Light should then pull out to where you can unplug your connection How to change the Rear diffy Fluid: Step by Step For Rodeo and Amigo: 1. Loosen the fill bolt (so it is easier to remove while the diffy cover is off) with a socket extension on your socket driver. 2. Loosen/ remove the track bar left hand side (I remove the nut from the leftside). 3. Place the pan below the diffy, loosen all the bolts, and smack it a couple of times with a rubber mallet. Let the oil start to drain a bit. (If you remove all the bolts at once you could end up taking an oil bath once your smack it with the rubber hammer). 4. Continue to loosen the bolts and drain the oil. 5. Once you have most of the oil out remove the cover. Clean the mating surfaces with a putty knife (if this is your first time since the truck was new you will find they used gasket maker stuff). 6. Replace the gasket with a paper gasket (if you want to

Related Questions

What is your question?

*Sadly, we had to bring back ads too. Hopefully more targeted.

Experts123