How do I replace cutters on the X-ACTO School Pro Pencil Sharpener?
View Video • First, gather the following tools: • Phillips-Head Screwdriver • Flat Head Screwdriver • Begin by unplugging the sharpener from the wall. • Turn the sharpener over and remove the three screws on the underside of the base. • Next, remove the two screws beside the cutter assembly near the front of the unit and remove the top cover. • Then, remove the three screws securing the cutter cover. To help with this process, place the motor mount on the base to support it. • Next, remove the screw at the center of the large white gear. If your model does not have a screw at the center of the white gear, please contact customer service for assistance at 1-800-879-4868. • Using a flathead screwdriver, gently pry the white gear off the carrier shaft and remove the cutter and carrier assembly. • Install the new cutter and carrier assembly by sliding it into place. • Reassemble the sharpener in the reverse order starting with the white gear, then the screws securing the cutter cover, the
