How do i remove my oven door?
I am not familiar with your make and model range/oven, BUT… Most oven doors are designed for removal and replacement WITHOUT having to remove any screws or bolts. It sounds like you have PARTIALLY removed your oven door, and in the process have caused a misalignment which is preventing closing. You probably have NOT “messed up” the hinges, and don’t have to totally remove the door to complete reinstallation and alignment. Mine is removed by opening the oven door about 10 or 15 degrees, where there happens to be a detent [stop/hold] notch in the hinge mechanism. While in that position, I firmly grasp the door with one hand on each side, and lift UPWARD at the angle the door is open. The hinges extend INTO the bottom outer edges of the door, and it just “slides” upward and off the two hinges that remain in the detented partially open position. Replacing the door is just a matter of carefully aligning the door to the proper angle, with the tips of the hinges in the slots in the bottom e
