How do I relink the sensor and display?
If your display is not linked properly, or it needs to be relinked for any reason, please do the following: • Remove the battery cover from the display and place face down. • Place the sensor next to the upturned display. • Locate the round, blue linking button on each. • Firmly press and release the linking button on the sensor. You should notice a flashing light next to it. • Now firmly press and release the linking button on the display. The flashing light on the sensor should become stop flashing for two seconds. • Turn the display over and you should now see a ‘0’ on the screen. The display is ready and waiting for a signal from the sensor. • Replace the battery cover. Your display and sensor and now linked. • Clip your sensor back onto the meter cable.
