How Do I Program A Keyless Remote For A 2007 Toyota Tundra?
viewsouth, here is the procedure that my Toyota dealer gave me (I’m having the same issue with my ’07 Tundra DC with security system). These instructions are the same as those that I got off of one of the Toyota Solutions forums. I’ve not been able to successfully execute them, but am going to try again tonight. I think you really need to be within the time allowances on all the steps… Let me know if this works for you. REGISTER RECOGNITION CODE (USING SWITCH OPERATION) (a) The following conditions must be met. • No key in the ignition key cylinder. • The driver side door is open (the other doors are closed). • The driver side door is unlocked. (b) Insert and remove the key into / from the ignition key cylinder twice (Insert → Remove → Insert → Remove) within 5 seconds. HINT: The procedure should end with the key removed. (c) Perform the following operations within 40 seconds. (1) Close and open the driver side door twice (Close → Open → Close → Open). HINT: The procedure should end
