How do I place more than one AudioScience card in a machine?
Each card needs a unique adapter number. Cards are shipped out from our facility set to 1. To give an audio card adapter number 2, with the card’s nameplate facing you, look for the four sets of pins at the top, back end of the card. The left-most position represents 1. Move the jumper to the next set of pins to the right – this is position 2. If you need adapter number 3 or 4, simply move the jumper to the next set of pins to the right or the right-most set of pins. For tuner cards, there is a small rotary dial at the top of the card that sets the adapter number. Note that on the rotary dial, 0 represents adapter number 1, 1 will represent adapter number 2, and so on.
