How do I mount telemark bindings correctly? Where are the mounting templates and ski lengths?
Click here to download a mounting jig and mounting tips. The template for the mounting jig must be printed on 100% zoom, to insure that the dimensions are correct. Mounting: 1. Do not mount the toepiece directly on the ski without a riser plate. The riser plates are symmetrical and can be used left or right. Toepieces are NOT symmetrical but designed for left and right foot. Make sure you consider this when mounting. You can tell the left and right toepiece apart by the eye for the leash on the lateral part in the forward part of the binding. This eye is on the outside of the binding. The base plates are also NOT symmetrical but designed for left and right foot. They are marked L and R. 2. To get at the back mounting holes on the O1, use a flat screwdriver and carefully push back the spring loaded hook that holds the binding in ski mode. 3. The heel block is placed correctly when you measure the sole of your boot and use the diagram below to determine the distance between the back dril
