How do I Make a Sliding Mirror Wall Cabinet?
A sliding mirror wall cabinet requires some woodworking tools such as a router or table saw and can be constructed in a couple of hours with the proper tools. The cabinet can be built to fit mirrors you have on hand to decrease the expense. Put on safety goggles and put masking tape in an X over the location where you want the mirror’s knob to be. Put carbide drill bit into the drill, and drill a hole into the mirror. Drill very slowly and do not press hard, or the mirror will break. Place second mirror face down onto the first mirror, and mark the exact location of the hole. Repeat procedure for second mirror and set it aside. Sand each piece of wood to get rid of any splinters. Attach one of the 36-inch boards to one of the 17 1/2-inch boards using an angle bracket and 1/2-inch wood screws, making sure the angle is square (90 degrees). Place the angle bracket on the inside angle where the boards meet so the bracket will be hidden inside the cabinet. You now have the top board of the
