How do I install the WaveBlades into the chassis?
Make sure the power is turned off. Make sure your environment is static free. Insert the management card into slot 0 of the chassis. The management card has the word Management on the front panel. To insert the card into the chassis, align the card with the top and bottom notches so the card slides in smoothly. Make sure the card is fully inserted by observing that the black handles have locked into place. Now insert the rest of your cards into any chassis slot as described above. Any card can go into any chassis slot (with the exception of the management card which must go into slot 0). For more information, please refer to the WT90/WT20 page. After all cards are inserted, the power may be turned on. • How do I physically connect to the chassis to manage it? Locate the port labeled Ethernet on the back of the chassis. Connect a PC to this port using an ethernet cable. Ideally, this connection should be a direct connection. However a direct connection is not required. By default, the V
