How do I install the Jupiter Masterpiece Water ioniser ?
Jupiter Water Ionisers come with an adapter that attaches to your sink tap. But, please note that in the UK these tap diverters do not usually fit owing to the diversity of taps within the UK. This will allow you to still use your sink as you always do and divert the water into the Water Ioniser when you want to. It also comes with a 2.9 length of tubing that should be cut into two pieces. The first piece of the hose plugs into the faucet diverter or onto the separate faucet pipe and then into the INLET fitting at the back and bottom of the Water Ioniser on the left as you look at the front of the unit, with a spring clip0 provided. The second piece of hose fits into the OUTLET fitting on the right as you look at the unit from the front, with a spring clip provided, at the back and at the bottom of the Water Ioniser and then drapes into the sink. This is the tube that acid water will run out of. Water Ionisers always produce both alkaline and acid water simultaneously. The ratio is 70%
