How do I install the Hardwire kit (p/n 206880)?
One end of the power cord plugs directly into the detector. Two connectors are located on the other end, the “horseshoe” or “U” connector (ground “-“) and a “blade” connector (positive “+”). • Attach the “U” ground connector to chassis ground of the vehicle. This will be a metal area that makes contact with the metal of the vehicle. • To make the detector go on/off with the key, attach the positive wire in one of the following methods: • Locate an optional plug-in connector in the fuse box. Generally this connector is marked with “IGN” or “ACC”. Simply plug the spade connector into this jack. If no plug-ins are available on fuse box, go to option 2. • Select a circuit in the fuse box that has power to it only when the key is on (i.e., radio fuse). Remove the fuse selected. Cut the spade connector off the positive wire and strip back the wire about 1/4 to 1/2 an inch. Wrap the wire around one of the fuse’s metal tabs and replace back in fuse box. • To make the detector stay on all the t
