How do I install a rollbar or rollcage?
(also see question 6.17) John (vegadad) offers this advice: “The Jegsster roll bar kit is a weld in. What you will get is the main hoop and enough tube stock to make the down tubes and a cross tube to run behind the seats. for the Vega Kit this cross tube is an elongated curved piece to allow you to use the stock seats. You will also get, as part of the kit, some 2″X3″X16” stock for footing. If you elect to get the “Bolt-in” kit you will get a bunch of 6″X6″ plates to fabricate and weld to the hoop and down-tubes to make the bolt-in. Also, the barstock for the rear down tubes are straight so forget using your back seat. I would suggest looking at the Chris Alston chassisworks Kit, they have an option of bent rear tubes that will allow the use of the rear seat as well as offering swing aways for the crossbar behind the front seats. If you are making an exclusive 2 passenger ride the Jegs kit will do. Also Review the installation instructions available from Chris Alston they contain some
