Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How do I install a new windows installation to hard drive attached to the PSA150 SATA Raid card?

April 26, 2017attached card install installation raid SATA Windows

0

Posted

How do I install a new windows installation to hard drive attached to the PSA150 SATA Raid card?

1 Answer

0

Posted

STEP 1 Make sure to copy the Windows driver from the Driver CD on to a 1.44MB floppy diskette. You will need the driver in the 1.44MB floppy diskette during the installation. (a) With Raid function: Copy the\Silicon_Image\SIL3x12RAID\Windows driver from the Driver CD to the diskette. STEP 2: Connect the HD to the PSA150 controller card and insert the card into PCI slot. Start up the system. STEP 3: Boot up your Windows. Press “F6” for third party SCSI or driver installation at the beginning of the text mode installation. Insert the 1.44MB floppy diskette into the floppy drive. Press “S” when setup asks if you want to specify an additional device. STEP 5: Press “ENTER” to continue on with text mode setup. STEP 6: Follow the setup instructions to complete installing Windows.