How do I install a new Hard Disk and what sort of Hard Disk does the PB1400 support?
“); // –> A: Regardless of which model of PB1400 you have, by toady’s standards the hard disk is pretty small. The good news is that notebook hard disks are no longer as expensive as they once were, and adding a few gigabytes of storage need not break the bank. Installing a hard disk is also relatively straight forward thanks to the ease with which you can gain access to the innards of the PB1400. Two things to be careful of though: First is to make sure that the Apple Drive Setup software supports the make of drive that you are interested in (IBM etc. are supported). To find out about a specific model then you either need to post a question on one of the technical forums or try to find an Apple TIL on the subject (So far I have failed). Second is to make sure that the drive will fit into the enclosure. You need to get a drive 12.5mm or smaller (I think 12.7mm may work, but I need someone to verify this) and of course it has to be a laptop drive (meaning 2.5 inch) with an IDE interfac
