Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How do I install a DIMM Modules in an HP 8000 printer?

April 26, 2017DIMM HP install modules printer

0

Posted

How do I install a DIMM Modules in an HP 8000 printer?

1 Answer

0

Posted

This document contains reprinted material from the Hewlett Packard LaserJet 8000 User’s Manual Appendix C. Consult your manual for the most updated information. • Turn the printer off. Unplug the power cord and disconnect any cables. • Loosen the two captive thumb screws on the back of the printer. • Grasp the screws and pull the formatter board out of the printer. Place it on a flat, non-conductive surface. • Remove the DIMM from the anti-static package. Hold the DIMM with fingers against the side edges and thumbs against the back edge. Align he notches on the DIMM with the DIMM slot. (Check that the locks on each side of the DIMM slot are open, or outward). • Press the DIMM straight into the slot (press firmly). Make sure the locks on each side of the DIMM snap inward into place. (to remove a DIMM, the locks must be released). • Carefully slide the formatter board back into the printer and tighten the two screws. • Plug in the power cord and connect all cables. Turn the printer on.