How do I hook up my 2BA-221 to a Digidesign 002 or 003?
With a 002, there are two ways to set this up. You can run from the XLR output of the 2BA-221 into one of the 1/4″ inputs on the 002 (NOT the XLR input, this is the mic pre input) and turn the switch on the back to take a +4dB level. Or, run a balanced 1/4″ TRS cable from the 1/4″ TRS output of the 2BA-221 into one of the 1/4″ inputs on the 002 and set the switch to accept -10dB inputs. For the 003, use the +4dB XLR output into one of the 1/4″ TRS inputs as the 003 only takes +4dB levels.
