How do I get the video form the satellite closet output into the Webcast Communicator?
Video captured in the chapel can connect to the meetinghouse video system using a video port (usually found on the side of the first chapel overflow area). Once the video has been fed into the meetinghouse video system, it can be accessed from a video out port in the satellite cabinet. The process of getting video out of the satellite equipment rack depends on the version of the satellite system. Newer systems will have a Video Distribution Amplifier (VDA) in the satellite rack that is already set up for the camera signal. These cases require a cable with matching connectors. The output of the VDA will either be a BNC connector, or an F connector. When you have the correct cable, find an empty or unused output on the VDA and connect it to the Webcast Communicator video input (the easiest option will likely be the RCA composite). In older systems, the cable from the video port in the chapel will go directly to the video in on the Chapel modulator. These cases require an additional Video
