Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How do I flush the DragonFly™ fuel line?

April 26, 2017flush FUEL line

0

Posted

How do I flush the DragonFly™ fuel line?

1 Answer

0

Posted

Flushing is required any time valve cleaning has been performed. • Connect stove to Fuel Bottle with DragonFly Pump as if assembling for operation. (Do not include windscreen or Heat Reflector). • Remove Flame Spreader, Jet and Shaker Jet Needle. • Turn On/ Off Valve and Flame Adjuster ON and allow fuel to run through fuel line for 30 seconds. CAUTION: Always flush away from any ignition source. Spilled fuel is a fire hazard! Light stove away from cleaning area and only after residual fuel on stove has evaporated. • Reinstall Shaker Jet Needle, Jet and Flame Spreader. • Light stove. While stove is lit, adjust output several times through full range of flame. This may loosen remaining deposits. • If clogging persists, repeat flushing process. Two or three flushing cycles are often required to completely clean out deposits.