How Do I Fix The Limit On An Old Genie Door Opener”?
Genie garage door openers replacement repair part for chain drive door operators limit clips. Step1 Remove any old garage door opener limit clips which may still be attached to the door opener chain. Using the garage door opener pushbutton or the door operator remote control transmitter, position the garage door approximately 1 to 2 feet from the closed position. Step 2 Disengage the garage door opener carriage from the inner slide by pulling the red release cord. Manually close the garage door. Measure the distance between the middle of the inner slide and the middle of the carriage. Step 3 Remove three limit clips and three self tapping screws from the garage door opener parts bag. The garage door remains closed. Viewing from the top of the power unit, note the two limit actuators on each side of the power unit at the end closest to the rail assembly (“up” and “down). Using the same distance (1′ – 2′) obtained step 2, measure along the garage door opener chain from the down actuator.
