How do I fit electric underfloor heating systems?
This depends upon the type of system being installed. Please refer to the individual fitting instructions by using the following links below, or contact us by email for further assistance. Cable Mat Installation Cable Kit Installation Mirror Demister Installation Thermostat Installation How do I lay tile backer insulation boards? Concrete floors – Remove all traces of existing finishes back to the concrete substrate, which should be level and dust free. Any new concrete or screed should be well cured prior to the fixing of insulation board. A good proprietary cement floor tile adhesive should be used, however, where underfloor heating is to be included, use a flexible floor tile adhesive for boards of 6mm or 10mm depth. For thicker boards, standard floor tile adhesive can be used. Do NOT use solvent based adhesives. Apply the bed of adhesive to the floor using a notched trowel, any slight imperfections to the floor will normally be taken up with the thickness of the adhesive. Boards sh
Related Questions
- Some suppliers offer electric underfloor heating which they claim to be 30-50% more efficient than ormal electric underfloor heating systems. Are they?
- Are electric underfloor heating systems designed to heat a room or just to keep a floor warm?
- Will the HouseHeat system work with underfloor heating systems or electric radiators?
