How do I fit a new seal to my drysuit?
Place a washing up liquid bottle filled with water up the sleeve, place the seal over the suit (and bottle) so that it fits in place exactly. Use several rubber bands, placed ontop of the seal to holid it in place just above the end of the seelve. Mark on the suit with a pencil or chalk where the seal comes upto and roll the seal back, so that both glueing edges are exposed, and you can see the bottle underneath (Check that the seal fits it place when you roll it back). Place some paper under the now turned back edge to protect the rest of the seal from glue overspill, and apply glue to seal and suit. Take some care with this and be sure to glue right up to the fold in the seal so the glue will extend just beyond the suit when the seal is rolled down. Glue up to the line you marked on the sleeve. Let it touch dry, and repeat. Roll the seal down over the suit, and it will fit exactly (you’ve already checked it!). Use a roller (or can) to press the materials together. Let the glue cure f
