How do I exchange the glass and screen on my full lite door for summer and fall?
The glass and screen are held in the door frame with vinyl retainers that slide into the inside of the door frame. These can be pried out of the door frame with a slot type screwdriver (you may want to use a cloth over the frame or tape the screwdriver shaft to prevent scratches when doing this). Have someone hold the glass in place while doing this to prevent it from falling out unintentionally. Once the retainers are removed the glass can be taken out of the door and the screen installed by snapping the retainers back in place. When putting the screen or glass into the frame insert the bottom edge first and be sure it is located as far to the outside as possible. This will allow the retainers to go back into the door frame properly. Illustrated instructions are included in the installation manual, which can be downloaded from the “Installation” page.
