How do I connect to the NetCam using HyperTerminal?
Make sure you have the NetCam connected to your PC. Using the provided null modem serial cable, plug it into S1 (AUX) on the NetCam and into an available serial port on your computer. Click Start –> Programs –> Accessories –> Communications –> HyperTerminal. When the program first runs, it’ll either prompt you for an area code or name. If it prompts you for an area code, provide one and click OK. It should then prompt you for a name. Any name will do. On the next screen, for “Connect Using”, select the com port that the camera is connected to. Click OK. On the next screen, change the Bits per second to 38400. Click OK. The next screen should be a blank window. Hit enter a couple of times and you should see a prompt (/>).
Related Questions
- How come nothing appears on the HyperTerminal window or the output is undecipherable when I try to connect to the COM1 port?
- Why when trying to program the unit through a HyperTerminal session, when the connect command is typed the screen is blocked?
- How do I connect to the NetCam using HyperTerminal?
